iGUARD Pan-Tilt USB PC Camera / Surveillance Camera / Security Camera (Model No. iCam-03)iCam-03 / Comes with iGuard Video Server - Splitter . It features a new modern and a more aesthetically appealing look and features auto rotation and tilt settings. Pan: 320 degrees & Tilt: 60 degrees
Features compact stand-alone web server capable of remote video surveillance. It can be accessed from anywhere in the world via a standard browser. Each system can simultaneously support up to 2 USB PC cameras.
Remarkably, the iGuard™ can stream video images directly to the Internet without having to go through a computer. The PTZ camera included with this package allows for high speed pan/tilt and digital zoom functions. This lets the user pan across 320 degrees, tilt through 60 degrees, and offers digital zoom capabilities while remotely viewing live events.
Also included with the iGuard is a powerful management and control software application that allows the user to schedule recordings, receive email notification of events, and trigger automatic recording by motion detection, just to name a few.
Every individual and business can benefit greatly from iGuard. Imagine increasing productivity at the work place by staying on top of daily events, even when you are not there. Visualize a grandparent’s joy by watching a grandchild that lives half way around the world (or just in the next city or state). Think about the comfort it brings to be able to monitor a loved one’s care at a school, daycare or nursing home facility. The broad array of applications for this device is endless.
iGuard is an affordable solution to your surveillance and security needs. It is developed based on network technology.
This device allows the user to stream live video images directly to the internet without a PC. In another words, iGuard itself will act as your server / gateway to the internet specifically for streaming video images - live.
In addition to substantial cost savings by eliminating the need for a PC, the user also enjoy greater flexibility. It's compact size (48mm x 63mm x 21mm) and light weight (75grams), allows the device to be easily installed almost anywhere. You can now have a monitoring camera installed at a location of your choice.
Among some of it's capabilities include motion detection, image recording, event logging, password enabled, emailing events, and etc... It can be configured such that motion detected will be recorded onto your local hard drive. It can handle up to 30 viewers per USB camera and can set up to 8 user accounts.
Features
Easy installation for users of all levels with iGuard Utility (a step-by-step installation wizard).
View images from your web enabled PDA.
Monitor multiple iGuard using iGuardView (a Windows based freeware) when you make a purchase.
Flexible Motion Detection and Image Recording functions. Email notification for Motion Detection, daily report, etc...
Configure up to 4 viewing time frames (Permit Hours).
Able to display multiple images on a single screen.
Support up to 30 simultaneous remote viewers per USB camera.
Display viewer's IP, account, viewed camera, login time and total downloaded bytes.
Detailed event log with listing options.
Event listing by Level and Type.
Limit the max FPS to each of the 8 user account.
Number of Viewers control per USB camera (max of 30 viewers/camera) Block / black-list up to 256 IP addresses from accessing iGuard.
Schedule up to four time slots when motion detection is active.
Upload motion detected images to a specified FTP server. Schedule up to two time slots for image forwarding (to email or FTP server).
Update firmware directly from iGuard webpage.
Save current settings to a file making settings recall easy.
How does it connect to the Internet?
iGuard utilizes the current internet infrastructure to stream the video and share it with the world. It also features a DDNS for users with dynamic IP as well as a PPPoE option to dial into your xDSL provider.
The following diagram illustrates three common network configurations for iGuard;
1. iGuard is connected to a Router/IP share and Cable/xDSL modem to stream video to the internet. This is the most common configuration where a Router is used. The Router Port Forwarding has to be configured to allow Public access to iGuard.
2. iGuard is connected to a HUB and a Cable / xDSL modem. In this setup, the user will need to setup PPPoE within iGuard. Enter the username and password as provided by the ISP to allow iGuard to dial-up to the internet.
3. iGuard is connected directly to a Cable / xDSL modem. Similiar to configuration above, the PPPoE section in iGuard will have to be configured to allow access to the internet. In addition, the user will have to setup a DDNS account (choose from the list provided by iGuard Setup Wizard)
The following are detailed information of the USB PC Camera packaged with iGuard. All cameras used with iGuard have common Processor and Sensor specifications.
Standard Specification of Packaged USB Camera:
VIMICRO ZC0301 Plus processor inside.
Color CMOS VGA sensor with 350,000 pixels.
MJPEG compression.
Up to 30 frames per second.
USB Interface, reverse compliant with USB 1.1
Focus Distance: 5cm to infinity, manually adjustable Focus Lens.
Minimum illumination: 2.5 lux @f1.4
Visual angle: 51/60 degree horizontal.
Auto Control for White balance, Exposure, Color/Brightness.
Operating Temperature: 0C to +40C.
iCam-03 is the replacement model for iCam-02. It features a new modern and a more aesthetically appealing outlook. It is also fitted with a more advanced motor which allows for a smoother Pan & Tilt function.
USB Controlled Pan/Tilt, RS232 port not required.
USB cable length: 1.5 meters
Pan: 320 degrees / Tilt: 60 degrees
Dimension: 110 (W) x 112 (H) x 106 (D) / Net Weight: 450g
|
